[PLUG] kde/system locking up
Abraham Zwygart
ziggy at anodizing.com
Thu Apr 18 16:53:12 UTC 2002
Thanks all
I will try this out tonight
Abraham Z.
"Mazhary-Clark, Ben" wrote:
> Answers to your Questions:
> 1. How do I list the bootup messages? Are they in a log file?
> A. under /var/log/dmesg you should see your boot messages.
>
> 2. Is there a way to list all of the irq # and what they are assigned to?
> A. `cat proc/interrupts` should give you a listing.
>
> 3. The last thing changed was installing a new network card to get on the
> cable
> modem. In windows it says that the irq for the nic is #5. I thought
> irq #5 was
> reserved for the printer? I am thinking that because the nic was the
> last to be
> installed that I will need to changed it's irq setting. How?
> Nic NEC 3000 pci pnp
> A. If you feel you need to change the IRQ setting for your parallel
> port you need to change it in the BIOS. If you need to change the network
> card you may need to download a setup utility to reconfigure the settings of
> the card. But without knowing that card (NEC 3000? I couldn't find on the
> net) in specific I can't tell you.
>
> Hope this helps,
> --ben
> (VxD on #orlug at irc.openprojects.net)
>
> _______________________________________________
> PLUG mailing list
> PLUG at lists.pdxlinux.org
> http://lists.pdxlinux.org/mailman/listinfo/plug
More information about the PLUG
mailing list