[PLUG] setting up a network

[Mike De La Mater]

You can use the ip address of the RH box, like http://192.168.10.10 if you want, 
it doesn't need a name, unless you want one. You must use the htp:// on the IP 
address for it to access by IP. You can enter the ip in hosts.conf on your 
winboxen so they don't need DNS.

Mike

6/14/02 9:32:23 PM, Richard Kurth <rkurth at starband.net> wrote:

>
>I have a network set up using a hub on my primary computer the one
>that is connected to the Internet I am running win2000 Then I have a win
>98 computer connected to the hub and the last computer I have connected
>is running RedHat Linux 7.2. My question is how do I set Apache up on
>the Linux server so that I can access it with a browser from the
>windows box. What server name would I add to the http.conf file and
>any thing else I need to make this just like I was accessing a server
>on the web. I can access the server with telnet with no problem.
>
>  
>
>-- 
>Best regards,
> Richard                          mailto:rkurth at starband.net
>
>
>_______________________________________________
>PLUG mailing list
>PLUG at lists.pdxlinux.org
>http://lists.pdxlinux.org/mailman/listinfo/plug
>
_____________________
Mike De La Mater
Computer Consulting
Twenty five years experience
Networks, PCs and office technologies
503-702-6749
mikedela at ipns.com