[PLUG] Another Drive Related Question

[Russell Evans]

No jumper usually means the IDE connector only has a single drive. Some drives
when they are only drive on the connector and set to master or slave will not
work, some will. Any same jumper, ie master and master on the same connector,
usually causes one drive to disappear.	Some drives will not play nice with
others no matter how the jumpers are set.  So the best thing to do is to
experiment, to find out how your drives behave.  

Thank you
Russell




On Sat, 09 Nov 2002 13:47:14 -0800, Richard Steffens said:

>  Do I need to install jumpers on the Seagate drives? This setup has