[PLUG] Power-Off problem
Stephen Liu
satimis at writeme.com
Sun Oct 20 10:36:47 UTC 2002
Hi Tony,
There is no such an item in the CMOS of the motherboad. I have been
suffering this defect ever since I ran RH7.3. I can power off manually
without disturbance to the PC. It is only inconvenient.
Thanks
Stephen
At 10:09 PM 10/16/2002 -0700, you wrote:
>Does power management need to be enabled in the CMOS setup to get this
>functionality to work? I can't recall and I don't want to reboot my box
>to find out.
>
>Tony
>
>On Wednesday 16 October 2002 21:16 pm, Kyle Accardi wrote:
> > Stephen Liu wrote:
> > > Hi All Folks,
> > >
> > > CPU AMD Athlon 1.4G
> > > Motherboard 2thMax 8KHA
> > > ATX system
> > > OS Rh8.0
> > >
> > > I suffered this problem since running RH7.3. My RH8.0 was upgraded
> > > from a RH7.3 box
> > >
> > > During "shutdown PC" on graphic mode RH8.0 closed but the PC is not
> > > power-off. Following text displayed on screen
> > >
> > > - snip -
> > > Halting system
> > > md: stopping all md devices
> > > flushing ide device : hda hdc hdd
> > > Power down
> > >
> > > The screen hangs here and power is still on.
> >
> > I've seen this, too. Some machines power themselves off (ATX only?),
> > but not all. Don't know what it is, but it is safe to hit the switch
> > when you see "Power down".
>
>--
>Anthony Schlemmer
>aschlemm at attbi.com
>
>
>
>
>_______________________________________________
>PLUG mailing list
>PLUG at lists.pdxlinux.org
>http://lists.pdxlinux.org/mailman/listinfo/plug
More information about the PLUG
mailing list