[PLUG] Routing Query
Stafford A. Rau
srau at rauhaus.org
Mon Sep 16 18:45:58 UTC 2002
* Richard Langis <richard.langis at sun.com> [020916 08:57]:
> Since the wireless AP is on eth1 on the fileserver, I put the wireless
> network on the 192.168.2.0 network, whereas the wired network is
> 192.168.1.0. The default route is pointed at the firewall. The laptop
> can login to the fileserver, and ping the 1.252 interface from itself
> (not only while logged in remotely). It cannot, however, ping any other
> host on the 1.x network.
Does your laptop, when connected via wireless, have a default route
pointing at 192.168.2.1 (or whatever the fileserver's eth1 address is)?
Does your fileserver have ip routing turned on?
(cat /proc/sys/net/ipv4/ip_forward should equal 1 if the fileserver is
running linux)
--Stafford
More information about the PLUG
mailing list