[PLUG] 2 NICs (RESOLVED FOR ME)
Chris Emery
deathfox at moochercrew.org
Wed Sep 18 23:38:21 UTC 2002
On Wed, Sep 18, 2002 at 01:48:29PM -0700, Chris Emery wrote:
> So, I have a compaq pressario 7234, which has 2 PCI slots in it, one is
> shared with an ISA slot, the other is all by itself. I got 2 D-Link
> NICs, which use the ne2k_pci driver. The botom most controler is the
> one that is shared with an ISA slot, the top controler is not. If both
> NICs are in the machine, the bottom controller works and the top
> controller does not work, A single NIC in either of the controllers
> works perfectly.
>
Strangest thing. The last couple of nights I've been trying to get ISA
NICs working in this thing (It's OLD 120mhz), anyways, None of them
would work, so I figured it was just the NICs, but I was getting strange
output using ethreal, I could see packets flowing from the box, and too
the box, but the box didn't see the packets.
Anyways, With a both PCI nics in there, and a ISA nic in there, for some
reason the ISA nic works, that means out of 3 cards in the box, 2 are
working. For the time being this is good enough for me...Maybe I'll
work on it more later...Firewall setup time
Chris
More information about the PLUG
mailing list