[PLUG] xdm works but startx fails

Randall Hansen list at sonofhans.net
Mon Aug 18 13:01:01 UTC 2003


Folks ~

My Thinkpad R32 loads X just fine after booting, but if I exit and then
later type "startx" it fails.  I'm running Debian 'testing' and, while
not an expert, have little trouble with it.  This has me stumped, though.

My XF86Config-4 is included below.

I diff'd a log file from a successful start (calling it 'xdm success
log') with one generated right after shutting down X and running 'startx'
('startx failure log').  The differences are all in the 'drmOpenDevice' section.

Can anyone tell me why this is happening and/or how to fix it?

TIA,

Randall


--- begin xdm success log ---
(==) RADEON(0): Write-combining range (0xe8000000,0x1000000)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) RADEON(0): [drm] loaded kernel module for "radeon" driver
(II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:0:0"
--- end xdm success log ---


--- begin startx failure log ---
(==) RADEON(0): Write-combining range (0xe8000000,0x1000000)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:0:0"
--- end startx success log ---

=== XF86Config-4 ===

### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
#   dpkg-reconfigure xserver-xfree86
# as root.  Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc101"
	Option		"XkbLayout"	"us"
	Option		"XkbOptions"	"ctrl:nocaps"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"PS/2"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"RadeonMobility"
	Driver		"radeon"
	VideoRam	16384
EndSection

Section "Monitor"
	Identifier	"LCD"
	HorizSync	30-60
	VertRefresh	50-75
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"RadeonMobility"
	Monitor		"LCD"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

### END DEBCONF SECTION


-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://lists.pdxlinux.org/pipermail/plug/attachments/20030818/9c1f6829/attachment.asc>


More information about the PLUG mailing list