[PLUG] Strange df output
Matt Alexander
m at phxlinux.org
Sun Apr 11 14:58:01 UTC 2004
Quoting Derek Loree <drl at drloree.com>:
> On Sun, 2004-04-11 at 09:01, Matt Alexander wrote:
> > Here's the output from df on my Debian box:
> >
> > Filesystem Size Used Avail Use% Mounted on
> > /dev/hda1 -5155770632644k 1.0k 0.0k 2% /
> > /dev/hda2 -1030762396011k 1.0k 0.0k 3% /var
> > /dev/hda3 -9033376957100k 1.0k 0.0k 8% /home
> >
> >
> > Odd, no?
>
> Yes, quite odd.
> >
> > When I run "hdparm /dev/hda", I see this as the last line:
> >
> > HDIO_GET_BUSSTATE failed: Input/output error
> >
> >
> > Any ideas what's going on?
>
> More details, what is the chipset controlling the hard drive, what is
> the make and size of the hard drive, what kernel are you running, what
> is the rest of the output from hdparm?
Random info gleaned from various locations:
2.2.20-idepci #1 Sat Apr 20 12:45:19 EST 2002 i686 unknown
Bus 0, device 31, function 1:
IDE interface: Intel Unknown device (rev 2).
Vendor id=8086. Device id=24db.
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
I/O at 0x0 [0x1].
I/O at 0x0 [0x1].
I/O at 0x0 [0x1].
I/O at 0x0 [0x1].
I/O at 0xf000 [0xf001].
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24db
hda: HDS722580VLAT20, ATA DISK drive
hda: HDS722580VLAT20, 58644MB w/1794kB Cache, CHS=7943/240/63
/dev/hda:
multcount = 16 (on)
I/O support = 3 (32-bit w/sync)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 7943/240/63, sectors = 120103200, start = 0
HDIO_GET_BUSSTATE failed: Input/output error
Disk /dev/hda: 240 heads, 63 sectors, 7943 cylinders
Units = cylinders of 15120 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 2646 20003728+ 83 Linux
/dev/hda2 2647 3175 3999240 83 Linux
/dev/hda3 3176 7811 35048160 83 Linux
/dev/hda4 7812 7943 997920 82 Linux swap
name value min max mode
---- ----- --- --- ----
bios_cyl 7943 0 65535 rw
bios_head 240 0 255 rw
bios_sect 63 0 63 rw
breada_readahead 4 0 127 rw
bswap 0 0 1 r
file_readahead 124 0 2097151 rw
io_32bit 3 0 3 rw
keepsettings 0 0 1 rw
max_kb_per_request 64 1 127 rw
multcount 8 0 8 rw
nice1 1 0 1 rw
nowerr 0 0 1 rw
pio_mode write-only 0 255 w
slow 0 0 1 rw
unmaskirq 1 0 1 rw
using_dma 1 0 1 rw
More information about the PLUG
mailing list