[PLUG] CDRW device detection problem

[Vincent Yau]

I am using 2.4 Kernel.  But the ATAPI:0,1,0 for dev seems to work
fine.  Thanks

--vincent



>From: AthlonRob <athlonrob at axpr.net>
>Reply-To: plug at lists.pdxlinux.org
>To: plug at lists.pdxlinux.org
>Subject: Re: [PLUG] CDRW device detection problem
>Date: Sun, 29 Feb 2004 15:50:04 -0800
>
>On Sunday 29 February 2004 15:21, Vincent Yau wrote:
>
> > However, when I ran 'cdrecord -scanbus', I got this error:
> >
> > [root at localhost root]# cdrecord -scanbus
> > Cdrecord-Clone 2.01a19 (i686-redhat-linux-gnu) Copyright (C) 1995-2003 
>Jrg Schilling
> > cdrecord: Read-only file system. Cannot open '/dev/pg1'. Cannot open 
>SCSI driver.
> > cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you 
>are root.
> > cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
> > [root at localhost root]#
> >
> > XCDRoast reported that my drive is ATAPI:0,1,0.
>
>Are you using kernel 2.6.x?  If so, you need to tell cdrecord dev=/dev/hdc 
>(if
>it's hdc) or dev=ATAPI:0,1,0 as XCDRoast stated.  The latter is preferred 
>by
>cdrecord.
>
>If you're using 2.4.x with ide-scsi emulation for CD-RW access, I really 
>don't
>know what is up, sorry.
>
>Rob
>
>_______________________________________________
>PLUG mailing list
>PLUG at lists.pdxlinux.org
>http://lists.pdxlinux.org/mailman/listinfo/plug

_________________________________________________________________
Dream of owning a home? Find out how in the First-time Home Buying Guide. 
http://special.msn.com/home/firsthome.armx