[PLUG] Mounting USB "Thumb" Drive
Colin Kuskie
ckuskie at dalsemi.com
Thu Sep 1 17:12:28 UTC 2005
On Thu, Sep 01, 2005 at 10:08:51AM -0700, Rich Shepard wrote:
> Current sd00:00: sns = 70 2
> ASC=3a ASCQ= 0
> Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00
> 0x3a 0x00 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes,
> disk size 1GB. sda: test WP failed, assume Write Enabled
> /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
> unable to read partition table
> Device not ready. Make sure there is a disc in the drive.
> Device not ready. Make sure there is a disc in the drive.
>
> Does this mean the USB thumb drive has gone bad?
>
> What do you suggest I do?
If there's no data that you want from the drive, I'd try formatting it.
If it won't format, then you know it's bad.
Colin
More information about the PLUG
mailing list