[PLUG] ciscio 678

drew wymore drew.wymore at gmail.com
Fri Jun 2 17:27:26 UTC 2006


You'll definately need a 678 although its been EOL'd for years now so
obviously there's very little if any support for it.

Drew-

On 6/2/06, Lancashire, Pete <plancashire at ci.portland.or.us> wrote:
>
> i had two dead 675's .. all from Qwest as replacements
> the 678 they gave me has not died .. about 3 yrs old. if any
> thing the powersupplies from the 675's can be used on the
> $5 678's you find once in a while at thrift stores.
>
> Being gun shy i have a 2nd 678 all configured sitting next
> to the primary 678.
>
> Someday i want to change from the 678 to ???? so i can get
> decent SNMP data.
>
>
> > -----Original Message-----
> > From: Russell Senior [mailto:seniorr at aracnet.com]
> > Sent: Thursday, June 01, 2006 5:17 PM
> > To: General Linux/UNIX discussion and help; civil and on-topic
> > Subject: Re: [PLUG] ciscio 678
> >
> >
> > >>>>> "alan" == alan  <alan at clueserver.org> writes:
> >
> > alan> I don't think the Cisco 678 will work with the faster DSL
> > alan> service.  I guess it depends on what you are doing.
> >
> > I have a Cisco 678 at 7Mbps with Qwest.  I also have a Paradyne and an
> > Actiontec in reserve.  I also have a dead Cisco 675 and three that are
> > just useless.
> >
> >
> > --
> > Russell Senior         ``I have nine fingers; you have ten.''
> > seniorr at aracnet.com
> > _______________________________________________
> > PLUG mailing list
> > PLUG at lists.pdxlinux.org
> > http://lists.pdxlinux.org/mailman/listinfo/plug
> >
> _______________________________________________
> PLUG mailing list
> PLUG at lists.pdxlinux.org
> http://lists.pdxlinux.org/mailman/listinfo/plug
>



More information about the PLUG mailing list