[PLUG] anybody have an ASUS P5LD2-VM motherboard?
Russell Senior
seniorr at aracnet.com
Wed Sep 20 17:14:55 UTC 2006
>>>>> "Larry" == Larry Brigman <larry.brigman at gmail.com> writes:
Russell> I just got one of these and the USB isn't working. Can
Russell> anyone confirm that the USB hardware works for you? If so, I
Russell> can take mine back and get a replacement one.
Larry> We have about 8 in our office but I don't know if anyone has
Larry> used the usb ports yet. I'll test that in the morning when I
Larry> get to work.
Larry> I have sucessfully detected the USB flash devices. :) I could
Larry> not mount them because all of them have BSD file systems on
Larry> them that I was testing from freenas as a USB boot device.
Larry> The question I would ask; are you getting no detection from the
Larry> front panel or rear? Another question; does the bios have the
Larry> usb ports turned off?
Tried front panel (the ones on the motherboard) as well as the front
panel ones through the header. They are turned on in BIOS. I get
detection messages of the motherboard USB hardware during boot, with
some error message noise. I have an external hub plugged which shows
power on its LED. But if I plug anything in (either to the hub or any
of the other ports) such as a USB storage stick, I get a very brief
blink on the stick LED and then it goes off. Nothing shows in
/var/log/messages. Nothing shows in udevmonitor. Same thing on a
slightly old (spring-ish) Knoppix V5.0DVD as well as 2.6.17.13 and
2.6.18-rc7. On USB developer's advice (based on that error message
noise I didn't quite understand), I've tried removing the ehci-hcd
module, but that doesn't help either.
Would you mind running dmidecode on one you have tested as working and
mailing me the results so I can compare with mine?
Thanks a lot for the help!
--
Russell Senior ``I have nine fingers; you have ten.''
seniorr at aracnet.com
More information about the PLUG
mailing list