[PLUG] cdrecord, SCSI, and CD-RW

[Galen Seitz]

Roderick A. Anderson wrote:
> Quick question as I'm still testing.
> 
> Has anyone run a system with both SCSI hard drives and an ATA CR-RW?
> 
> If so, what distribution and have you had any problems burning a CD-RW 
> with cdrecord?
> 
> 
> TIA,
> Rod

My system fits that description.  I use k3b to burn discs, and I 
haven't had any problems.  Sorry I can't tell you the cdrecord command 
that k3b uses.  Before my NEC DVD writer died, I also had success 
burning DVDs.  If you are really desperate, I could burn a disc and 
note the cdrecord command that is used.


galens at toto:~$ cat /etc/redhat-release
CentOS release 5.2 (Final)

galens at toto:~$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
   Vendor: SEAGATE  Model: ST336807LW       Rev: 0C01
   Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 01 Lun: 00
   Vendor: SEAGATE  Model: ST336607LW       Rev: 0005
   Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 06 Lun: 00
   Vendor: SEAGATE  Model: DAT    9SP40-000 Rev: 912L
   Type:   Sequential-Access                ANSI SCSI revision: 03

galens at toto:~$ cat /proc/ide/hda/model
SONY CD-RW CRX160E

-- 
Galen Seitz