[PLUG] boot failures
wes
plug at the-wes.com
Fri Jun 11 15:57:38 UTC 2010
I got your last message, subject "Random failures." I just don't have any
ideas for you, sorry.
-wes
On Fri, Jun 11, 2010 at 8:46 AM, Denis Heidtmann
<denis.heidtmann at gmail.com>wrote:
> (Resend. Wednesday's send did not get through.)
>
> Occasionally when I boot my machine it hangs at the Ubuntu screen.
> Pressing
> the power button is the only cure. Restarting usually goes fine.
> Sometimes there is an on-screen message which goes much too fast to read.
> I managed to take a video of the screen once when this occurred. When I
> get the failure, I get the usual startup message: Boot from hd0.0 ext3 ...
> That stays on the screen for what seems like an unusually long time, then
> the message "...nForce2_Smbus 0000:00:01.1: Error probing SMB2. Starting
> up
> ..." appeared.
>
> I looked in the dmesg for this, and I find:
> ...
> [ 27.564121] udev: starting version 151
> [ 27.568555] Adding 5574512k swap on /dev/sda5. Priority:-1 extents:1
> across:5574512k
> [ 27.667831] EDAC MC: Ver: 2.1.0 Jun 3 2010
> [ 27.706474] i2c i2c-0: nForce2 SMBus adapter at 0x600
> [ 27.706480] ACPI: resource nForce2_smbus [0x700-0x73f] conflicts with
> ACPI region SM00 [0x700-0x73f]
> [ 27.706482] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 27.706485] nForce2_smbus 0000:00:01.1: Error probing SMB2.
> [ 27.712505] lp: driver loaded but no devices found
> [ 27.727096] k8temp 0000:00:18.3: Temperature readouts might be wrong -
> check erratum #141
> [ 27.727199] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 27.843374] EDAC amd64_edac: Ver: 3.2.0 Jun 3 2010
> [ 27.857388] type=1505 audit(1276142598.664:2): operation="profile_load"
> pid=639 name="/sbin/dhclient3"
> [ 27.857623] type=1505 audit(1276142598.664:3): operation="profile_load"
> pid=639 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
> [ 27.857754] type=1505 audit(1276142598.664:4): operation="profile_load"
> pid=639 name="/usr/lib/connman/scripts/dhclient-script"
> [ 27.861785] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
> [ 27.862064] input: Video Bus as
>
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input5
> ...
>
> This error message appears in dmesg every time, with and without the
> failure, so it may be unrelated.
>
> Ideas?
>
> Thanks,
> -Denis
> _______________________________________________
> PLUG mailing list
> PLUG at lists.pdxlinux.org
> http://lists.pdxlinux.org/mailman/listinfo/plug
>
More information about the PLUG
mailing list