[PLUG] CentOS upgrade trouble...

[Larry Brigman]

On Wed, Sep 8, 2010 at 7:07 PM, Larry Brigman <larry.brigman at gmail.com> wrote:
> On Wed, Sep 8, 2010 at 6:54 PM, Michael C. Robinson
> <plug_1 at robinson-west.com> wrote:
>> Okay, solved the network startup issue by explicitly indicating a
>> gateway for each network interface in the ifcfg-ethn files instead
>> of one gateway in /etc/sysconfig/network.
>
> Only need one as a default route.  If there are others those go into
> route-<ifname>
The entries here should be similar to what you would add from the
ip route add command.

172.18.232.64/26 via 172.18.232.1 dev eth1
172.18.232.128/26 via 172.18.232.1 dev eth1
172.18.232.192/26 via 172.18.232.1 dev eth1

>
>>
>> One odd problem left, on boot I get a cannot find usb 2-1 messages
>> even though nothing is plugged in to the usb ports.  During the
>> upgrade I had a dvd burner plugged into the usb, but I have since
>> taken it off.
>
> That is because it probably has an alias reference in /etc/modprobe.conf
>
>>
>> Another area of trouble is getting the spamcannibal local web site to
>> work.  Every time I try http://xerxes.robinson-west.com/tarpit/ I get
>> a 403 forbidden message.  Nothing in the logs beyond that, so I am
>> having a heck of a time troubleshooting it.
>
> Even from localhost?
> Maybe the httpd configs didn't get moded/upgraded as needed.  There are areas of
> packages that may have changed.
>
>>
>>
>> _______________________________________________
>> PLUG mailing list
>> PLUG at lists.pdxlinux.org
>> http://lists.pdxlinux.org/mailman/listinfo/plug
>>
>