[PLUG] AirRouter DHCP lease range

Denis Heidtmann denis.heidtmann at gmail.com
Mon Nov 24 06:23:10 UTC 2014


On Sun, Nov 23, 2014 at 5:58 PM, Russell Senior
<russell at personaltelco.net> wrote:
>>>>>> "Denis" == Denis Heidtmann <denis.heidtmann at gmail.com> writes:
>
> Denis> dhcpc.1.devname=eth1 dhcpc.1.fallback=192.168.10.1
> Denis> dhcpc.1.fallback_netmask=255.255.255.0 dhcpc.1.status=enabled
> Denis> dhcpc.status=enabled dhcpd.1.devname=eth0 dhcpd.1.dns.1.server=
> Denis> dhcpd.1.dns.1.status=disabled dhcpd.1.dns.2.server=
> Denis> dhcpd.1.dns.2.status=disabled dhcpd.1.dnsproxy=enabled
> Denis> dhcpd.1.end=192.168.1.254 dhcpd.1.lease_time=600
> Denis> dhcpd.1.netmask=255.255.255.0 dhcpd.1.start=192.168.1.2
> Denis> dhcpd.1.status=enabled dhcpd.status=enabled
>
> Denis> I suspect that the .end line is what needs to change.  But it
> Denis> seems dangerous to edit this file and expect that it would work
> Denis> just fine.
>
> Probably not dangerous.  Edit the .end or the .start, or both.  I would
> think if the cfg file is a text file, you should be able to edit it and
> "restore" that to the device.
>
>
> --
> Russell Senior, President

Done.

Now the problem is with the printer.  It wants a net mask, I enter
255.255.255.000, yet the printer says I gotta be no higher than 255.
Wha??  Try again tomorrow.

-Denis



More information about the PLUG mailing list