[PLUG] Xsane Does Not Find Scanner
King Beowulf
kingbeowulf at gmail.com
Sat Jun 20 19:01:23 UTC 2015
On 06/20/2015 10:18 AM, Rich Shepard wrote:
> On Sat, 20 Jun 2015, King Beowulf wrote:
>
>> check "lsusb" to make sure scanner shows up, try abother usb port.
>
> Ed,
>
> Will check 'lsusb' Real Soon Now; only recently thought of the port being
> an issue.
>
> Ever seen a small USB 4-port hub go bad? I suspect that I might have such
> an animal here. Two devices don't work with it, but do if plugged into
> another USB port; the speakers get their power via that hub and they work.
> So power is transmitted but data apparently are not.
>
check 'dmesg' for boot errors (/var/log/syslog will have the same
entries. I have a bad USB port on the motherboard and every once in a
while I forget its bad and plug something in...hours later: "Oh, wait..."
$ su -c "dmesg |grep hub"
Password:
[ 0.210348] usbcore: registered new interface driver hub
[ 4.896782] hub 1-0:1.0: USB hub found
[ 4.898290] hub 1-0:1.0: 2 ports detected
[ 4.966812] hub 2-0:1.0: USB hub found
[ 4.968316] hub 2-0:1.0: 2 ports detected
[ 4.991249] hub 3-0:1.0: USB hub found
[ 4.992469] hub 3-0:1.0: 10 ports detected
[ 5.042087] hub 1-0:1.0: USB hub found
[ 5.043247] hub 1-0:1.0: 2 ports detected
[ 5.093108] hub 2-0:1.0: USB hub found
[ 5.094283] hub 2-0:1.0: 2 ports detected
[ 5.161400] hub 4-0:1.0: USB hub found
[ 5.162586] hub 4-0:1.0: 2 ports detected
[ 5.228603] hub 5-0:1.0: USB hub found
[ 5.229811] hub 5-0:1.0: 2 ports detected
[ 5.295387] hub 6-0:1.0: USB hub found
[ 5.296629] hub 6-0:1.0: 2 ports detected
[ 8.737028] hub 2-0:1.0: Cannot enable port 1. Maybe the USB cable
is bad?
[ 9.699022] hub 2-0:1.0: Cannot enable port 1. Maybe the USB cable
is bad?
[ 10.660026] hub 2-0:1.0: Cannot enable port 1. Maybe the USB cable
is bad?
[ 11.621022] hub 2-0:1.0: Cannot enable port 1. Maybe the USB cable
is bad?
[ 11.622092] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 1591.612024] hub 2-0:1.0: Cannot enable port 1. Maybe the USB cable
is bad?
[ 1592.572024] hub 2-0:1.0: Cannot enable port 1. Maybe the USB cable
is bad?
[ 1593.532021] hub 2-0:1.0: Cannot enable port 1. Maybe the USB cable
is bad?
[ 1594.492023] hub 2-0:1.0: Cannot enable port 1. Maybe the USB cable
is bad?
[ 1594.492035] hub 2-0:1.0: unable to enumerate USB device on port 1
More information about the PLUG
mailing list