[PLUG] Gkrellmd on RPi
Don Buchholz
buchholz at easystreet.net
Sun Sep 25 14:22:44 UTC 2016
Excellent, Chuck! Good to see the problem resolved.
- Don
On 9/24/2016 5:35 PM, Chuck Hast wrote:
>
> On Sat, Sep 24, 2016 at 4:27 PM, Don Buchholz <buchholz at easystreet.net
> <mailto:buchholz at easystreet.net>> wrote:
>
> netstat -an -A inet
>
>
> Here is what it gave me:
>
> pi at kp4djt-dns:~ $ netstat -an -A inet
> Active Internet connections (servers and established)
> Proto Recv-Q Send-Q Local Address Foreign Address State
> tcp 0 0 127.0.0.1:19150 <http://127.0.0.1:19150>
> 0.0.0.0:* LISTEN
> tcp 0 0 0.0.0.0:53 <http://0.0.0.0:53>
> 0.0.0.0:* LISTEN
> tcp 0 0 0.0.0.0:22 <http://0.0.0.0:22>
> 0.0.0.0:* LISTEN
> tcp 0 172 192.168.7.2:22 <http://192.168.7.2:22>
> 192.168.7.62:45784 <http://192.168.7.62:45784> ESTABLISHED
> tcp 0 0 192.168.7.2:22 <http://192.168.7.2:22>
> 192.168.7.51:56086 <http://192.168.7.51:56086> ESTABLISHED
> tcp 0 0 192.168.7.2:22 <http://192.168.7.2:22>
> 192.168.7.51:56088 <http://192.168.7.51:56088> ESTABLISHED
> udp 0 0 0.0.0.0:67 <http://0.0.0.0:67> 0.0.0.0:*
> udp 0 0 0.0.0.0:68 <http://0.0.0.0:68> 0.0.0.0:*
> udp 0 0 192.168.7.2:123 <http://192.168.7.2:123>
> 0.0.0.0:*
> udp 0 0 127.0.0.1:123 <http://127.0.0.1:123>
> 0.0.0.0:*
> udp 0 0 0.0.0.0:123 <http://0.0.0.0:123>
> 0.0.0.0:*
> udp 0 0 0.0.0.0:5353 <http://0.0.0.0:5353>
> 0.0.0.0:*
> udp 0 0 0.0.0.0:59806 <http://0.0.0.0:59806>
> 0.0.0.0:*
> udp 0 0 0.0.0.0:53 <http://0.0.0.0:53> 0.0.0.0:*
>
> As you can see the very first entry is localhost and the 19150 port is
> the one
> set up in the gkrellmd.conf file.
>
> Here is one from another RPi I am using as a test bed. The first one
> is also
> my DNS/DHCP/NTP server.
>
> pi at rpi02:~ $ netstat -an -A inet
> Active Internet connections (servers and established)
> Proto Recv-Q Send-Q Local Address Foreign Address State
> tcp 0 0 0.0.0.0:19150 <http://0.0.0.0:19150> 0.0.0.0:*
> LISTEN
> tcp 0 0 0.0.0.0:22 <http://0.0.0.0:22> 0.0.0.0:*
> LISTEN
> tcp 0 280 192.168.7.127:22 <http://192.168.7.127:22>
> 192.168.7.62:49438 <http://192.168.7.62:49438> ESTABLISHED
> udp 0 0 0.0.0.0:68 <http://0.0.0.0:68> 0.0.0.0:*
> udp 0 0 192.168.7.67:123 <http://192.168.7.67:123>
> 0.0.0.0:*
> udp 0 0 192.168.7.127:123 <http://192.168.7.127:123>
> 0.0.0.0:*
> udp 0 0 127.0.0.1:123 <http://127.0.0.1:123> 0.0.0.0:*
> udp 0 0 0.0.0.0:123 <http://0.0.0.0:123> 0.0.0.0:*
> udp 0 0 0.0.0.0:5353 <http://0.0.0.0:5353> 0.0.0.0:*
> udp 0 0 0.0.0.0:56161 <http://0.0.0.0:56161> 0.0.0.0:*
>
> Again you can see the very first entry though this time 0.0.0.0 is the
> same
> port for gkrellmd. So it is shown in both of them
>
> ------ Did not send this so added the update to it. -----
>
> OK, I appear to have found it, checked my machines that were working and
> they all had the entry
> #address 127.0.0.1
> as
> address 127.0.0.1
> As soon as I put a octothorp in front of it and restarted the service,
> l got joy.
>
> Now I can watch my little server remotely from other parts of the house
> while I learn more about how it is doing.
>
> I use Hughesnet as my internet provider, sucks but seems like the ISP's
> around here only go after the ground level fruit, I live only 4 miles
> from town
> (including curves) and we can not even get stinking DSL here. I caught a
> centurylink tech working at a dmark box at the top of the hill, and asked
> him about it, he told me he had been hollering at management for ages
> now but they were concentrating on the high population centers, I asked
> about the Universal Fund monies, he said it was all going to Portland and
> Vancouver. I think I will demand a refund.
>
> Anyhow I replaced my Netgear router with a Mikrotik and outboarded the
> DNS/DHCP/NTP parts to a RPi, and between offloading those services to
> another box, reducing the amount of queries that had to go over that
> satellite
> link and possibly getting rid of some bufferbloat, it runs much more
> smoothly,
> and those places I go to a lot are of course a lot faster.
>
>
> --
>
> Chuck Hast -- KP4DJT --
> Glass, five thousand years of history and getting better.
> The only container material that the USDA gives blanket approval on.
>
>
More information about the PLUG
mailing list