[PLUG] Fiber connectors?

Chuck Hast wchast at gmail.com
Fri Nov 10 04:14:32 UTC 2017


Google This:
fiber keystone jack
And it will show you PICTURES!!!
You can google fibre connector types, and you will get a boat load of pix
and
data.

Here are some good pix and data:
http://www.thefoa.org/tech/connID.htm


On Thu, Nov 9, 2017 at 7:56 PM, John Jason Jordan <johnxj at gmx.com> wrote:

> On Thu, 9 Nov 2017 16:02:53 -0800 (PST)
> Rich Shepard <rshepard at appl-ecosys.com> dijo:
>
> >On Thu, 9 Nov 2017, John Jason Jordan wrote:
> >
> >> ... the skinny white fiber cable just dangles down between the studs
> >> and the end of it plugs into the back of the 'modem.'
>
> >> Unfortunately I am pretty stupid about fiber. It appears that there
> >> are different kinds of keystone jacks for different kinds of fiber,
> >> and I have no idea which kind to get. I also don't know what is
> >> required to connect the end of the cable from the street to the back
> >> of the jack, or what kind of patch cable I need to go from the jack
> >> to the modem. It looks like the end of the cable just plugs into the
> >> back of the modem, so I pulled on it to see if it just comes out,
> >> but it was kind of tight and I didn't want to force it, so I left it
> >> alone.
>
> >Inside the house it should be Ethernet; the optical translator should be
> >on the outside. That's the way it is here with Frontier's
> >installation. The fiber terminates in the outside box and the
> >converter moves electrons across the cat5 to the inside box.
>
> I definitely have fiber dangling down between the studs inside the
> house. It is far too skinny to be ethernet, plus it ends in a plug that
> is just a little thicker than a #2 pencil lead. The installer ran fiber
> from the street to a box that he mounted on the outside of the house
> (about one foot square, way bigger than it needs to be), and from
> there ran skinny fiber cable along the outside wall and then up the wall
> to a point where he could poke a hole through to the attic. He pulled
> the cable through the hole and then he ran the fiber cable halfway
> across the attic to a point where he could drop it down into the wall
> that didn't have sheetrock. That's the point where it plugs into the
> back of the what I think is the optical translator (about the size of
> an old fashioned cigar box). The optical translator has lights labeled
> PWR, BAT, LAN1, LAN2, LAN3, LAN4, POTS1, POTS2, LOS, and PON. The PWR
> LAN1 and PON are lit up. It uses a wall wart, not a battery. From the
> optical translator there is an ethernet patch cord to the D-Link
> DIR-860L that Russell fixed for me so that it would work as a router
> here. I don't know if this is a normal setup or not, but it's what I've
> got.
>
> I really need to speak to a CL installer. My frustration with calling
> technical support was because they have never been in the field, have
> never installed service in someone's house, and have no idea what kind
> of equipment is used. Their skill is solely in scheduling a service
> call. I described my installation to them and they had no idea what I
> was talking about.
>
> In the meantime, in order to continue with sheetrocking I would like to
> thread the cable through an empty hole in one of the ethernet plates,
> to which I can add a keystone jack (plus patch cable) later, once I
> figure out what kind I need. But to do that I need to pull it out of
> the back of the optical translator and then plug t back in, and that is
> scary.
> _______________________________________________
> PLUG mailing list
> PLUG at pdxlinux.org
> http://lists.pdxlinux.org/mailman/listinfo/plug
>



-- 

Chuck Hast  -- KP4DJT --
I can do all things through Christ which strengtheneth me.
Ph 4:13 KJV
Todo lo puedo en Cristo que me fortalece.
Fil 4:13 RVR1960



More information about the PLUG mailing list