[PLUG] Hardware recommendations
Rich Shepard
rshepard at appl-ecosys.com
Mon Sep 10 13:00:23 UTC 2018
On Mon, 10 Sep 2018, Bill Barry wrote:
> Does it remember any configuration setting? I.e. if you change some random
> BIOS setting, turn it off, turn it on and go back to the BIOS and see if
> that is still set. If no memory and not a battery problem then there is
> some bad connection from the battery to the motherboard, or maybe you left
> the reset jumper on the motherboard in the wrong position.
Bill,
With the new battery installed I set time and date, specified the boot
device and tried booting. That failed. When I restarted the system and
entered the BIOS settings they were as set.
The reset jumper was not installed. I have not used a CMOS reset jumper on
any system I've built. Haven't understood why I would want to.
Seems likely that the motherboard has a flaw somewhere.
Thanks very much for your ideas,
Rich
More information about the PLUG
mailing list