[PLUG] Connecting PoE injector

[Russell Senior]

Where is the switch in your network? I don't recall seeing that detail.

On Sun, Dec 22, 2019 at 1:09 PM Rich Shepard <rshepard at appl-ecosys.com>
wrote:

> On Sun, 22 Dec 2019, wes wrote:
>
> > The phrasing here is not as clear as it could be. It sounds like you're
> > referring to the two connections as if they are totally separate.
>
> Wes,
>
> There are three ports on the PoE injector: AC power off the wall wart,
> "Data
> In" on the PoE injector in which is connected to either the router (any LAN
> port) or the gigabit switch (any port), and "Pwr+Data Out" which is
> connected to the Meraki. My question was to what the "Data In" port should
> be
> connected: the router or the gigabit switch. Either way, the inejctor is
> between the "Data In" supplier and the WAP.
>
> > ER-X <-> POE injector (with power supply also connected) <-> Meraki WAP
>
> Thank you. That's what I assumed and asked for confirmation which you
> supply.
>
> Happy holidays,
>
> Rich
>
>
>
>
> _______________________________________________
> PLUG mailing list
> PLUG at pdxlinux.org
> http://lists.pdxlinux.org/mailman/listinfo/plug
>