[PLUG] Driver question

[Galen Seitz]

On 12/11/20 11:30 AM, Ken Stephens wrote:
> Galen,
> 
> Yes I did before I soldered it to the board.  Even checked the voltage:
> 3.22 V.

I suggest disconnecting the ft232 module from the prop board, and then 
trying to connect the ft232 to a known good USB port with a known good 
cable.  This should tell you whether the ft232 is functional.

Regarding drivers, I would expect any contemporary Linux kernel to 
already have the appropriate driver for an FTDI USB-serial device.

galen
-- 
Galen Seitz
galens at seitzassoc.com