[PLUG] cisco 678 DSL latency issues
Rogan Creswick
creswick at cs.orst.edu
Tue Aug 5 23:29:02 UTC 2003
Thanks! That seems to do the trick, although I'm having some issues
with what the cisco says it is set at and what is needed to actually
connect to it. (it claims 10baseTx-HD, when 100baseTx-HD is needed,
but I don't think that's a big problem.)
What I am still curious about is why is this a problem in the first
place? Is auto-negotiation particularly difficult with cisco hardware
or is there something I'm missing? Where would I look to start if I
were to attempt a patch for this?
Thanks again for all your help and reccomendations!
-Rogan
On Tue, Aug 05, 2003 at 07:32:36PM -0700, Steven A. Adams wrote:
> mii-tool and/or ethtool doesn't work on some cards I've found. If you
> have one of these NIC's you might want to add the:
>
> options <nic_driver_name> full_duplex=1
>
> line in /etc/modules.conf. In order to make that active you'll have to
> either reboot or jump through the hoops of downing the interface and
> doing the rmmod/depmod/modprobe/insmod combo that works for your dist.
>
> On Tue, 2003-08-05 at 19:00, Russell Evans wrote:
> > mii-tool -F 100baseTx-FD
> >
> > or
> >
> > mii-tool -F 10baseTx-FD
> >
> > Source
> > http://pcmcia-cs.sourceforge.net/ftp/extras/mii-tool.tar.gz
> >
> > Documentation
> > http://linux-ip.net/html/tools-mii-tool.html
> >
> > Thank you
> > Russell
> >
> > On Tue, 5 Aug 2003 13:19:17 -0700, Rogan Creswick said:
> >
> >
> > > I agree, the theory of the moment is that it is an auto-negotiation
> > > problem between the cisco and the linux box(es). I'm trying to figure
> > > out how to set this firmly on the linux side, but I'm having some
> > > issues. First off, I've not really dealt with this before, and I
> >
> >
> > _______________________________________________
> > PLUG mailing list
> > PLUG at lists.pdxlinux.org
> > http://lists.pdxlinux.org/mailman/listinfo/plug
> --
>
>
>
> _______________________________________________
> PLUG mailing list
> PLUG at lists.pdxlinux.org
> http://lists.pdxlinux.org/mailman/listinfo/plug
More information about the PLUG
mailing list