[PLUG] unable to mount ext3 file system
Josh Orchard
josh at emediatedesigns.com
Fri Aug 29 21:49:02 UTC 2003
thank you. that worked. odd to me though. I didn't have to in the fstab. Would
you now why?
josh
>
> I think you might need to specify a partition number, e.g.
>
> # mount /dev/hdh1 /mnt/point
>
>
>
> Josh Orchard wrote:
>
>>hello,
>>
>>I'm in the process of upgrading from RH 7.3 to RH 9.0. I have three extra disk
>>space disk that are each 120GB that I had on a second controller in the old
>> machine.
>> I took them out and bought 3 new disk that I'm going to place in the old machine
>>once the upgrade finishes.
>>
>>What I would like to do is use rsync and move the date from the old disk to the new
>>disk.
>>
>>To achieve this at a fast speed and together I have another RH 9.0 box where I'm
>>trying to mount one new drive of 120GB and one old drive. I will then run rsync
>> and
>>have the drives ready for the new computer when it finishes.
>>
>>The problem is I can't get the old drives to mount on the new machine. I have the
>>new drives created and working fine. I have tried each of the old drives and they
>>all tell me:
>>
>>mount: wrong fs type, bad option, bad superblock on /dev/hdh,
>> or too many mounted file systems
>>
>>when I try to mount. I'm mounting these with this command:
>>
>> mount -t ext3 /dev/hdh /oldcomputer/disk1
>>
>>I have tried ext2 and ext as well but same results. I have tried running fsck but
>>it says to try with another superblock if I have a ext2 partition and I have ext3
>>journaling.
>>
>>any suggestions on how I can get these hard drives mounted? I do have them backed
>>up on Tape but it seems I should be able to just mount and rsync and that would be
>>much faster being they are on the same computer.
>>
>>Thanks for any help,
>>
>>Josh
>>
>>_______________________________________________
>>PLUG mailing list
>>PLUG at lists.pdxlinux.org
>>http://lists.pdxlinux.org/mailman/listinfo/plug
>>
>>
>>
>>
>
>
>
>
> _______________________________________________
> PLUG mailing list
> PLUG at lists.pdxlinux.org
> http://lists.pdxlinux.org/mailman/listinfo/plug
>
More information about the PLUG
mailing list