[PLUG] Ubuntu Server on HP ProLiant DL380 G5

Chuck Hast wchast at gmail.com
Thu Aug 8 02:39:26 UTC 2019


looked in the kernel.log and found the following error message
bnx2  0000:05:00.0: Direct firmware load for bnx2/bnx2-mips-06-6.2.3.fw
failed with error -2
bnx2  Can't load firmware file " bnx2/bnx2-mips-06-6.2.3.fw"

Then it appears to try and load it again and fails. But it works in the
desktop version.

It LOOKS like the bnx2 module is in there, but if you try to insmod it, the
system comes back saying it doesn't
exist, if you look back in /sys/modules it is no longer there.  I also got
a pix of the system as it is setting up
the second line above is what is flashed on the screen. I am trying to
figure out how to work around this one.
Not sure what is going on with Ubuntu Live Server,


On Wed, Aug 7, 2019 at 8:42 PM Chuck Hast <wchast at gmail.com> wrote:

> The driver is bnx2,  I think as Server is loading I see some red lines
> flash by with bnx2 in them so I bet that
> either it is missing or not loading for some reason.
>
>
> On Wed, Aug 7, 2019 at 8:25 PM Chuck Hast <wchast at gmail.com> wrote:
>
>> I think I may see the issue, it appears that the Live Server needs to be
>> able to pull down some software, It would
>> appear that I am going to have to set up a static connection (No big deal
>> but kind of hoky given that the DT
>> version can find both NICs perfectly well.
>>
>> I also found that there is a way to use the Deb installer rather than the
>> Live server installer, that I much prefer,
>> just have to see how to do it.
>>
>>
>> On Wed, Aug 7, 2019 at 7:50 PM Chuck Hast <wchast at gmail.com> wrote:
>>
>>> Had never used ethtool before, did the ethtool -h and got a whole
>>> probably 3 screens of data. The first thing
>>> it wants is the DEVNAME, so I did a ifconfig, and it sees nothing, only
>>> the loop back.
>>> This is under Ubuntu server...
>>> Now to try the desktop version that appears to find the NIC ports just
>>> fine.
>>>
>>>
>>> On Wed, Aug 7, 2019 at 6:19 PM <alan at clueserver.org> wrote:
>>>
>>>>
>>>>
>>>> > Folks,
>>>> > I did this many moons ago when I lived in Kalama and worked at the
>>>> glass
>>>> > plant.
>>>> > They had some spare ProLiant servers in a rack doing nothing, they
>>>> wanted
>>>> > cameras, so I gave them cameras. I installed ubuntu server on one and
>>>> then
>>>> > I installed ZoneMinder, it was quite easy and that server did not even
>>>> > know
>>>> > it was
>>>> > working.
>>>> >
>>>> > I am trying to do the same thing again, I have a  HP ProLiant DL380 G5
>>>> > which
>>>> > I am trying to install Ubuntu server on but when I get to the NIC
>>>> setup it
>>>> > says
>>>> > DHCPv4 has supplied no addresses, I go in and make sure that DHCP is
>>>> > selected
>>>> > but no joy. Never had that problem before.
>>>> >
>>>> > I saw one person on line who had a similar problem, this person had a
>>>> URL
>>>> > that
>>>> > took you to a different version of Ubuntu server, but the file would
>>>> not
>>>> > read.
>>>> >
>>>> > If I load in the regular desktop version it does see the NIC cards
>>>> and it
>>>> > obtains addresses
>>>> > for both ports (I plug them both into active networks)
>>>> >
>>>> > Any idea of what I am fighting here? Why does the server version not
>>>> take
>>>> > the NIC
>>>> > cards but the desktop does?
>>>>
>>>> ethtool will tell you what kernel module is used. See if it is loading
>>>> in
>>>> both versions.
>>>>
>>>> ---
>>>> Q: Why do programmers confuse Halloween and Christmas?
>>>> A: Because OCT 31 == DEC 25.
>>>>
>>>> _______________________________________________
>>>> PLUG mailing list
>>>> PLUG at pdxlinux.org
>>>> http://lists.pdxlinux.org/mailman/listinfo/plug
>>>>
>>>
>>>
>>> --
>>>
>>> Chuck Hast  -- KP4DJT --
>>> I can do all things through Christ which strengtheneth me.
>>> Ph 4:13 KJV
>>> Todo lo puedo en Cristo que me fortalece.
>>> Fil 4:13 RVR1960
>>>
>>>
>>
>> --
>>
>> Chuck Hast  -- KP4DJT --
>> I can do all things through Christ which strengtheneth me.
>> Ph 4:13 KJV
>> Todo lo puedo en Cristo que me fortalece.
>> Fil 4:13 RVR1960
>>
>>
>
> --
>
> Chuck Hast  -- KP4DJT --
> I can do all things through Christ which strengtheneth me.
> Ph 4:13 KJV
> Todo lo puedo en Cristo que me fortalece.
> Fil 4:13 RVR1960
>
>

-- 

Chuck Hast  -- KP4DJT --
I can do all things through Christ which strengtheneth me.
Ph 4:13 KJV
Todo lo puedo en Cristo que me fortalece.
Fil 4:13 RVR1960



More information about the PLUG mailing list